Bölümümüz Akademik Personeli tarafından son dört yıl içerisinde yayınlanmış olan makaleler aşağıda sunulmuştur.
2023
1- Annealing‑induced modifications on structural, surface chemical bonding, and electrical characteristics of p‑NiO/n‑TiO2 heterostructure, ŞENOL KAYA,UĞUR SOYKAN,MUSTAFA SUNKAR,SEDA KARABOĞA,MUHSİN UĞUR DOĞAN,RIFKI TERZİOĞLU,GÜRCAN YILDIRIM,CABİR TERZİOĞLU, Journal of Materials Science: Materials in Electronics, 2023
2- Contribution of vanadium particles to thermal movement of correlated two-dimensional pancake Abrikosov vortices in Bi-2223 superconducting system, ASAF TOLGA ÜLGEN,ÜMİT ERDEM,GÜRCAN YILDIRIM,TAHSİN TURĞAY,MUSTAFA BURAK TÜRKÖZ, Boletín de la Sociedad Española de Cerámica y Vidrio, 2023
3- The effect of sintering parameters and MgO ratio on structural properties in Al7075/MgO composites: a review, MUHARREM PUL ,ÜMİT ERDEM,MUSTAFA BURAK TÜRKÖZ,GÜRCAN YILDIRIM, Journal of Materials Science, 2023
4- Resorbable membrane design: In vitro characterization of silver doped-hydroxyapatite-reinforced XG/PEI semi-IPN composite, DENİZ DOĞAN, ÜMİT ERDEM,BÜŞRA MORAN BOZER,MUSTAFA BURAK TÜRKÖZ,GÜRCAN YILDIRIM,AYŞEGÜL ÜLKÜ METİN, Journal of the Mechanical Behavior of Biomedical Materials, 2023
5- Improvement in deformation degree of Zr surface-layered Bi-2223 ceramics by diffusion annealing temperature, ALİ MERCAN,RIFKI TERZİOĞLU,MUHSİN UĞUR DOĞAN,ŞENOL KAYA,ÜMİT ERDEM,GÜRCAN YILDIRIM,CABİR TERZİOĞLU,AHMET VARİLCİ,Ceramics International, 2023
6- Variation of fundamental features of cobalt surface-layered Bi-2212 superconductor materials with diffusion annealing temperature, İlker Öz,CABİR TERZİOĞLU,MUHAMMED ÖZ,ASAF TOLGA ÜLGEN,MUSTAFA BURAK TÜRKÖZ,ÜMİT ERDEM,GÜRCAN YILDIRIM , Ceramics International, 2023
7- Design of dual‐conductive polyacrylonitrile‐based composite nanofiber: Synergistic effect of copper nanoparticles decorated‐boron nitride and polyaniline, Zümer Orhun,DENİZ DOĞAN,ÜMİT ERDEM,GÜRCAN YILDIRIM,ZÜHTÜ ONUR PEHLİVANLI,AYŞEGÜL ÜLKÜ METİN, Polymer Composites, 2023
8- Evolution of operable slip systems, lattice strain fields and morphological view of Bi-2223 ceramic system with optimum NiO addition, ALİ MERCAN,Emre Kara,MUHSİN UĞUR DOĞAN,ŞENOL KAYA,RIFKI TERZİOĞLU,ÜMİT ERDEM,GÜRCAN YILDIRIM,CABİR TERZİOĞLU, Materials Today Communications, 2023
9- Change in transition balance between durable tetragonal phase and stress-induced phase of cobalt surface-layered in Bi-2212 materials by semi-empirical mechanical models, ÜMİT ERDEM, GÜRCAN YILDIRIM,MUSTAFA BURAK TÜRKÖZ,ASAF TOLGA ÜLGEN,ALİ MERCAN, Physica Scripta, 2023
10- Development of modulation, pairing mechanism, and slip system with optimum vanadium substitution at Bi-sites in Bi-2212 ceramic structure,ASAF TOLGA ÜLGEN,Semih Okur,ÜMİT ERDEM,CABİR TERZİOĞLU,TAHSİN TURĞAY,MUSTAFA BURAK TÜRKÖZ,GÜRCAN YILDIRIM, Materials Chemistry and Physics, 2023
11- Evolution of basic features of Bi1.8Pb0.4Sr2Ca2.2Cu3Oy ceramic systems with NiO impurity, Emre Kara,MUHSİN UĞUR DOĞAN,ŞENOL KAYA,GÜRCAN YILDIRIM,CABİR TERZİOĞLU, Journal of Materials Science: Materials in Electronics, 2023
12- Bilge, H. ve Morgül, Ö.K. 2023. Analytical and Experimental Investigation of the Rotary Inertia Effects of Unequal End Masses on Transverse Vibration of Beams, Applied Sciences, 13, 2518.
13- Yıldırım, R., Ullah, M. S., Koçoğlu, H., Ün, M., Yazıcı Çakır, N., Demir, G., ... & Kodal, M. (2023). Effects of Hybrid POSS Nanoparticles on the Properties of Thermoplastic Elastomer-Toughened Polyamide 6. ACS omega.
14- Kocoglu, H., Korkusuz, O. B., Ozzaim, P., Kodal, M., Altan, M. C., Sinmazcelik, T., ... & Ozkoc, G. (2023). Solid particle erosion and scratch behavior of novel scrap carbon fiber/glass fabric/polyamide 6.6 hybrid composites. Polymer Composites, 44(10), 7197-7211.
15- K. GELİŞ, K. ÖZBEK, Ö. ÖZYURT, and A. N. ÇELİK, “Multi-objective optimization of a photovoltaic thermal system with different water based nanofluids using Taguchi approach,” Applied Thermal Engineering, vol. 219, no. 119609, pp. 1–13, Jan. 2023.
16-M. Kara, N. S. Ferguson, A hybrid methodology for the frequency response function variability due to joint uncertainty, Mechanical Systems and Signal Processing, 202 (2023), 110700, https://doi.org/10.1016/j.ymssp.2023.110700
17-M. Kara, N. S. Ferguson, A two-stage Polynomial Chaos Expansion application for bound estimation of uncertain FRFs, Journal of Sound and Vibration, 566 (2023), 117930, https://doi.org/10.1016/j.jsv.2023.117930
18-F.C. Bolat, M. Kara, Identification of slotted beam parameters for low frequency flow-induced vibration energy harvesting, European Physical Journal Plus. 138 (378) (2023) 1-11. https://doi.org/10.1140/epjp/s13360-023-03951-0
19- KAHRAMAN, M. F., & GENEL, K. (2023). Bending performance of the AuxOcta multi-cellular beam structure. Engineering Structures, 294, 0–0.2
2022
GELİŞ, K., ÖZBEK, K., ÇELİK, A. N., & ÖZYURT, Ö. (2022). A novel cooler block design for photovoltaic thermal systems and performance evaluation using factorial design. Journal of Building Engineering, 48(103928), 1–18.
GELİŞ, K., & AKYÜREK, E. F. (2022). Experimental Investigation on Heat Transfer of Al2O3-MWCNT Water Based Hybrid Nanofluids in Double Pipe Mini Heat Exchanger Design of Experiments Using RSM. Heat Transfer Research, 53(2), 71–94.
GELİŞ, K., ŞAHİN, B., & BAYRAKÇEKEN YURTCAN, A. (2022). Development of Novel Flow Fields for PEM Fuel Cells Numerical Solution and Experimental Validation. Heat Transfer Research, 53(2), 29–44.
BOLAT, F. Ç. (2022). Experimental and numerical analysis of vibration-based hybrid energy harvesting from non-classical beam structures. Structures, 37,
BAŞARAN, F. Ç. BOLAT, and S. SİVRİOĞLU, “Vibration suppression of wind turbine nacelle with active electromagnetic mass damper systems using adaptive backstepping control,” Journal of Vibration and Control, pp. 0–0, Mar. 2022.
Seçgin A, Kara M, Ferguson N. Discrete singular convolution–polynomial chaos expansion method for free vibration analysis of non-uniform uncertain beams. Journal of Vibration and Control. February 2021. doi:10.1177/1077546320988190
2021
GELİŞ, K., & AKYÜREK, E. F. (2021). FACTORIAL DESIGN FOR CONVECTIVE HEAT TRANSFER ENHANCEMENT OF HYBRID NANOFLUIDS BASED ON Al2O3-TiO2 IN A DOUBLE PIPE MINI HEAT EXCHANGER. Heat Transfer Research, 52(15), 41–62.
GELİŞ, K. (2021). Factorial Experimental Design for Second Law Analysis of Panel Radiators as a Function of Radiator Dimension. Journal of Building Engineering, 43(1), 1–12.
GELİŞ, K., & AKYÜREK, E. F. (2021). Entropy generation of different panel radiator types Design of experiments using response surface methodology RSM . Journal of Building Engineering, 41(102369), 1–11.
GELİŞ, K., & AKYÜREK, E. F. (2021). Energy and Fuel Cost Analysis for Four Different Degree-Day Regions in Turkey. Erzincan Üniversitesi Fen Bilimleri Enstitüsü Dergisi, 14(1), 50–60.
AKYÜREK, E. F., GELİŞ, K., & YOLADI, M. (2021). Farklı gölgeleme durumlarının fotovoltaik panel karakteristiği üzerine etkisi. Gümüşhane Üniversitesi Fen Bilimleri Enstitüsü Dergisi, 11(1), 161–168.
ERDEM, Ü., TÜRKÖZ, M. B., NEZİR, S., ZALAOĞLU, Y., & YILDIRIM, G. (2021). Refinement of fundamental characteristic properties with homovalent Er Y partial replacement of YBa2Cu3O7 y ceramic matrix. Journal of Alloys and Compounds, 884, 161131–0.
SOYKAN, U., SERT, Y., & YILDIRIM, G. (2021). DFT Molecular Docking and Drug-likeness Analysis Acrylate molecule bearing perfluorinated pendant unit. Journal of Molecular Structure, 1244, 0–0.
ERDEM, Ü., ZALAOĞLU, Y., ÜLGEN, A. T., TURĞAY, T., & YILDIRIM, G. (2021). Role of trivalent Bi Tm partial substitution on active operable slip systems in Bi-2212 crystal structure. Cryogenics, 113(1), 103212–103212.
Bulut, F., Ozturk, Ö., Acar, S., & Yildirim, G. (2021). Effect of Ni and Al doping on structural, optical, and CO2 gas sensing properties of 1D ZnO nanorods produced by hydrothermal method. Microscopy Research and Technique, 1– 16. https://doi.org/10.1002/jemt.24013
KAYA, N., ÇAVDAR, Ş., YILDIRIM, G., KORALAY, H., & ÖZTÜRK, Ö. (2021). Evaluation of superconducting features and gap coefficients for electron phonon couplings properties of MgB2 with multi-walled carbon nanotube addition . Journal of Materials Science: Materials in Electronics, 0–0.
ERDEM, Ü., MORAN BOZER, B., TÜRKÖZ, M. B., METİN, A. Ü., YILDIRIM, G., & NEZİR, S. (2021). Spectral analysis and biological activity assessment of silver doped hydroxyapatite. Journal of Asian Ceramic Societies, 9, 1524–1545.
Dogruer, M., Aksoy, C., Yildirim, G. et al. Influence of Sr/Nd partial replacement on fundamental properties of Bi-2223 superconducting system. J Mater Sci: Mater Electron 32, 7073–7089 (2021). https://doi.org/10.1007/s10854-021-05417-4
Zalaoglu, Y., Erdem, U., Bolat, F.C. et al. Improvement in fundamental electronic properties of Bi-2212 electroceramics with trivalent Bi/Tm substitution: a combined experimental and empirical model approach. J Mater Sci: Mater Electron 32, 19846–19858 (2021). https://doi.org/10.1007/s10854-021-06509-x
ERDEM, Ü., AKKURT, B., ÜLGEN, A. T., ZALAOĞLU, Y., TURĞAY, T., & YILDIRIM, G. (2021). Effect of annealing ambient conditions on crack formation mechanisms of bulk Bi-2212 ceramic systems. Journal of Asian Ceramic Societies, 3, 1214–1227.
Öz, M., Bozkurt, Ç., Kanbur Yılmaz, B., & Yıldırım, G. (2021). Effect of borates on the synthesis of nanoscale hexagonal boron nitride by a solid-state method. Microscopy Research and Technique, 84( 11), 2677– 2684. https://doi.org/10.1002/jemt.23817
Akkurt, B., Erdem, U., Zalaoglu, Y. et al. Evaluation of crystallographic and electrical-superconducting features of Bi-2223 advanced ceramics with vanadium addition. J Mater Sci: Mater Electron 32, 5035–5049 (2021). https://doi.org/10.1007/s10854-021-05238-5
ERDEM, Ü., & YILDIRIM, G. (2021). Determination of Possible Maximum Critical Transition Temperatures with Empirical Model Depending on Structural Disorders-Defects for Bi2 1Sr2 0Ca1 1Cu2 0Oy System. Bitlis Eren Üniversitesi Fen Bilimleri Dergisi, 10(2), 393–402.
BOLAT, F. Ç., BAŞARAN, S., & KARA, M. (2021). Investigation of energy harvesting in composite beams with different lamination angles under dynamic effects. Composite Structures, 270, 0–0.
ZALAOĞLU, Y., ERDEM, Ü., BOLAT, F. Ç., AKKURT, B., TURĞAY, T., & YILDIRIM, G. (2021). Improvement in fundamental electronic properties of Bi-2212 electroceramics with trivalent Bi Tm substitution a combined experimental and empirical model approach. Journal of Materials Science: Materials in Electronics, 32, 0–0.
Fevzi Cakmak Bolat and Selim Sivrioglu 2020 “Bending vibration control of a MR fluid embedded smart beam exposed by the conjunction of wind-induced galloping effects” Smart Mater. Struct. 29 115036
BOLAT, F. Ç. (2020). An Experimental Analysis and Parametric Simulation of Vibration-Based Piezo-Aeroelastic Energy Harvesting Using an Aerodynamic Wing Profile. ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING, 45(7), 0–0.
SİVRİOĞLU, S., & BOLAT, F. Ç. (2020). Switching linear quadratic Gaussian control of a flexible blade structure containing magnetorheological fluid. TRANSACTIONS OF THE INSTITUTE OF MEASUREMENT AND CONTROL, 42(3), 0–0.
BOLAT, F. Ç., & ERGÜN, M. (2020). BİNA MODELİNDEKİ KÜTLE DEĞİŞİMİNİN DİNAMİK KARAKTERİSTİKLER ÜZERİNDEKİ ETKİLERİNİN SAYISAL VE DENEYSEL YÖNTEMLERLE İNCELENMESİ . EJONS INTERNATIONAL JOURNAL ON MATHEMATICS, ENGINEERING NATURAL SCIENCES, 4(13), 0–0.
BOLAT, F. Ç. (2020). Improving Energy Harvesting Efficiency by Vibration-Induced Stresses of Piezoelectric Patch Glued Tapered Beams. Sakarya Üniversitesi Fen Bilimleri Enstitüsü Dergisi, 24(4), 0–0.
KARA, M. (2021). A higher order statistical moment based approach for the distribution of eigenvalues of beams with variable cracked depth. Mechanical Systems and Signal Processing, 161, 107965–0.
BOLAT, F. Ç., BAŞARAN, S., & KARA, M. (2021). Investigation of energy harvesting in composite beams with different lamination angles under dynamic effects. Composite Structures, 270, 114056–0.
KARA, M., GÜLER, S., & SEÇGİN, A. (2021). Sensitivity analysis of laminated composite plates with different orientations in low to high order modes. Smart Materials and Structures, 30, 85034–0.
KARA, M., & SEÇGİN, A. (2021). Discrete singular convolution method for modelling of waveguide interaction of beam-type structures with impedance boundaries. Engineering Structures, 247, 113209–0.
KARA, M. (2021). Kalın ve katmanlı kompozit plakaların temel doğal frekansının mekanik özelliklerin küçük değişimlerine duyarlılığı. Gümüşhane Üniversitesi Fen Bilimleri Enstitüsü Dergisi, 11(2), 547–553.
BALA, M. M., ŞAHİN, A. A., BOZ, M., DURUKAN, Y., FIRAT, T., PAKDİL, M., & ÖZTURAN, K. E. (2021). Effects of Cyanoacrylate in Rabbits with Induced Achilles Tendon Rupture. Medical Science Monitor, 27(1), 27–0.
2020
ÜLGEN, A. T., ERDEM, Ü., ZALAOĞLU, Y., TURĞAY, T., & YILDIRIM, G. (2020). Effect of vanadium addition on fundamental electrical quantities of Bi-2223 crystal structure and semi-empirical model on structural disorders-defects. JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS, 31(16), 13765–13777.
ÖZTÜRK, Ö., Nefrow, A. R. A., BULUT, F., ADA, H., TÜRKÖZ, M. B., & YILDIRIM, G. (2020). Effect of Co Cu partial replacement on fundamental features of Y-123 ceramic. JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS, 31(10), 7630–7641.
ZALAOĞLU, Y., TURĞAY, T., ÜLGEN, A. T., ERDEM, Ü., TÜRKÖZ, M. B., & YILDIRIM, G. (2020). A novel research on the subject of the load-independent microhardness performances of Sr Ti partial displacement in Bi-2212 ceramics. JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS, 31(1), 22239–22251.
SOYKAN, U., ÇETİN, S., & YILDIRIM, G. (2020). N1 N4-BİS ALİLKARBAMOİL TEREFİTALAMİD MOLEKÜLÜNÜN DENEYSEL VE TEORİK KARAKTERİZASYONU. International Journal of Advances in Engineering and Pure Sciences, 0–0.
SOYKAN, U., VALİYEVA, F., & YILDIRIM, G. (2020). A VALUABLE VIEW ON EVALUATION OF GENERAL MECHANICAL PERFORMANCES PERTAINING TO Bi-2223 SUPERCONDUCTING CERAMICS WITH VANADIUM ADDITION. Eskişehir Technical University Journal of Science and Technology A - Applied Sciences and Engineering, 21, 20–27.
SOYKAN, U., ÇETİN, S., & YILDIRIM, G. (2020). Experimental and Theoretical Approaches for the Characterization of the Novel Ethane-1 2-diylbis azanediyl bis carbonyl bis 4 1-phenylene Diacrylate Molecule. Journal of New Results in Science (JNRS), 0–0.
SOYKAN, U., VALİYEVA, F., & YILDIRIM, G. (2020). EXAMINATION OF VANADIUM EFFECT ON GENERAL MECHANICAL CHARACTERISTICS OF Bi-2223 MATERIALS VIA SEMI-EMPIRIC MODELS. Eskişehir Technical University Journal of Science and Technology A - Applied Sciences and Engineering, 21, 91–100.
GELİŞ, K. (2020). Şeffaf bir PEM Yakıt Hücresinin Performansının Değerlendirilmesi. Düzce Üniversitesi Bilim ve Teknoloji Dergisi, 8(3), 1852–1863.
GELİŞ, K., & YEŞİLDAL, F. (2020). Klasik ve Modern Yapı Elemanları Kullanılması Durumunda Isı İletim Katsayısının Değişimi İle Minimum Yalıtım Kalınlığının Tayini. Gümüşhane Üniversitesi Fen Bilimleri Enstitüsü Dergisi, 10(4), 869–877.
AKYÜREK, E. F., GELİŞ, K., & YOLADI, M. (2020). Farklı Tip Isı Değiştiriciler için Termodinamik Analiz. Iğdır Üniversitesi Fen Bilimleri Enstitüsü Dergisi, 10(2), 1202–1212.
GELİŞ, K., AKYÜREK, E. F., & YOLADI, M. (2020). Panel Konumu ve Açısının Fotovoltaik Panel Karakteristiği Üzerine Etkisi. Iğdır Üniversitesi Fen Bilimleri Enstitüsü Dergisi, 10(3), 1899–1908.
GELİŞ, K., AKYÜREK, E. F., & YOLADI, M. (2020). Panel Konumu ve Açısının Fotovoltaik Panel Karakteristiği Üzerine Etkisi. Iğdır Üniversitesi Fen Bilimleri Enstitüsü Dergisi, 10(3), 1899–1908.
YEŞİLDAL, F., & GELİŞ, K. (2020). Gümüşhane İklim Şartlarında Farklı Malzemeler İçin Yalıtım KalınlıklarınınTS 825 Kapsamında Değerlendirilmesi. Gümüşhane Üniversitesi Fen Bilimleri Enstitüsü Dergisi, 10(3), 830–843.
ÖZBEK, K., & ÖZYURT, Ö. (2022). Investigation of the parameters affecting the building cooling capacity using the response surface method RSM . Gümüşhane Üniversitesi Fen Bilimleri Enstitüsü Dergisi, 0–0.
ÇELİK, A. N., & Özgür, E. (2020). Review of Turkey s photovoltaic energy status Legal structure existing installed power and comparative analysis. Renewable and Sustainable Energy Reviews, 134, 1–12.
KOÇ, fatih, & ÇELİK, A. N. (2020). Polikristal Tür bir Fotovoltaik Panelin I-V Karakteristiğinin Analitik Modellenmesi ve Deneysel Validasyonu. Düzce Üniversitesi Bilim ve Teknoloji Dergisi, 8(4), 2491–2515.
KESKİN, A., ŞEN, M., & EMİROĞLU, A. O. (2020). Experimental studies on biodiesel production from leather industry waste fatand its effect on diesel engine characteristics. FUEL, 276(118000), 1–8.
HARMANCI, F., & ÖZTÜRK, S. (2020). Optimization of Axial Misalignment due to Glass Drilling by Statistical Methods. Sakarya University Journal of Science, 0–0.
KARA, M., SEÇGİN, A., & Baygün, T. (2020). Discrete Singular Convolution Method for Acoustic Transmission Lines. Acoustics Australia, 48(2), 271–285.
ÇAVUŞ, V., & KARA, M. (2020). Experimental Determination of Sound Transmission Loss of Some Wood Species. Kastamonu Üniversitesi Orman Fakültesi Dergisi, 20(2), 190–199.
Boz, M., ÇAKICI, H., PAKDİL, M., ŞAHİN, A. A., Duzcu Erdoğan, S., BALA, M. M., & çelik, metin. (2020). Does methylene blue reduce adhesion during the healing process after tendon repair . Eklem Hastaliklari ve Cerrahisi-Joint Diseases and Related Surgery, 31(2), 246–254.
DORUK, E., Ayartürk, H., Ekbiç, K., & PAKDİL, M. (2020). Innovative Cold Storage Air Conditioning SystemDevelopment For Vehicles. Dokuz Eylül Üniversitesi Mühendislik Fakültesi Fen ve Mühendislik Dergisi, 22(66), 735–740.
